HK Macau Stepwgn Club - Powered by Discuz! Board

標題: 求救 [打印本頁]

作者: kennykong 時間: 20-6-2014 01:02 標題: 求救

今日用清水洗完車就變成咁，成車身佈滿水點印，知唔知點解?上手車主個打立師傳話honda車既車身油係咁，要等底層乾哂先變返靚仔

作者: Kingcow 時間: 20-6-2014 07:18

要推泥膠清走d水印?

作者: thomas1113lo 時間: 20-6-2014 07:44

今日用清水洗完車就變成咁，成車身佈滿水點印，知唔知點解?上手車主個打立師傳話honda車既車身油係咁，要等底層乾哂先變返靚仔
kennykong 發表於 20-6-2014 01:02

咁你要30號出席去，睇下點去積啦

作者: kennykong 時間: 20-6-2014 08:20

Thx,等我試下用泥膠先。我30號要開通頂黎唔到

作者: dicken 時間: 20-6-2014 11:28

今日用清水洗完車就變成咁，成車身佈滿水點印，知唔知點解?上手車主個打立師傳話honda車既車身油係咁，要等底層乾哂先變返靚仔
kennykong 發表於 20-6-2014 01:02

個d cfu 講野你地好信，如果佢講既野係真，honda d 車仲駛賣

作者: kennykong 時間: 20-6-2014 11:32

我就係唔係好信所以求救

作者: dicken 時間: 20-6-2014 11:33

我就係唔係好信所以求救
kennykong 發表於 20-6-2014 11:32

You should go to UNICON to do a wax package at least...

作者: kennykong 時間: 20-6-2014 12:05

邊度黎？有無多點information

作者: dicken 時間: 20-6-2014 12:26

邊度黎？有無多點information
kennykong 發表於 20-6-2014 12:05

pls visit the website and pls feel free to contact them

http://uniconproshop.com/en/

作者: RIOLAM129 時間: 20-6-2014 15:00

即刻揾 Sammy 搞啦, 整層保護膜就掂哂

作者: dicken 時間: 20-6-2014 16:15

即刻揾 Sammy 搞啦, 整層保護膜就掂哂
RIOLAM129 發表於 20-6-2014 15:00

其實係要幫佢起底，做番靚個底先再上coat....
大project

作者: kennykong 時間: 21-6-2014 00:20

我睇個package成$6xxx

作者: crazy-ks 時間: 21-6-2014 01:22

有冇睇錯？

作者: kennykong 時間: 21-6-2014 09:52

乜唔係全面車身保護鍍膜咩

作者: cliffchow 時間: 21-6-2014 16:09

水印炸... 你去買支面臘/幼臘/水晶臘。水印係你車身臘影響及你洗完車後抹乾時間太長，姐係唔夠快手。

btw, 有時間去unicon都好，服務一流

作者: kennykong 時間: 21-6-2014 18:04

等我明日試試，因呢兩日都放假，月尾無得放

作者: sammykwan 時間: 21-6-2014 21:28

本帖最後由 sammykwan 於 21-6-2014 21:36 編輯

今日用清水洗完車就變成咁，成車身佈滿水點印，知唔知點解?上手車主個打立師傳話honda車既車身油係咁，要等底層乾哂先變返靚仔
kennykong 發表於 20-6-2014 01:02

just use cut compound, polish and then wax to clean up body part should solve. But before doing that, please make sure you do claying.

the c-fu may be right, coz I have seem some customers' RF look exactly the same. But their cars were not wax for years.......I believe that is because there is no wax protection on the body surface which is the problem, should not only happened on Honda's car.

The easier way to test it is try to put some spray wax on it and see if the water mark can be avoided.

作者: kennykong 時間: 22-6-2014 01:31

你係咪就係unicon Sammy呀，如係我想你可否揸去你度比你望望同比d意見關於鍍膜

作者: sammykwan 時間: 22-6-2014 12:39