HK Macau Stepwgn Club - Powered by Discuz! Board

標題: SPADA入手 [打印本頁]

作者: stanleykun 時間: 1-8-2010 21:17 標題: SPADA入手

用後感~以前楂開MOBILIO,家下新版好似MO仔慨放大版,力水唔錯,第一次楂2千CC慨車,比起楂豐田仲好去D咁,睇位冇想像中咁難,第一次楂咁大部車,開初都好驚,但係遊左半個鐘都上手,(澳門)八百半,聯邦,宋玉生,信達城呢幾個大路D慨停車場都好易入到,老婆剛剛生完仲係坐月中,坐上呢部車都冇難度,舒適度一流,標版設計我最愛,真係好鬼死靚仔,包圍哥邊原廠都以經唔錯,係老婆話個車頭好似惡左DD,以上為個人意見,希望大家交流下~~~~

作者: tkwan 時間: 1-8-2010 22:36

Yes, Spada RK is really good except it is a bit slow in accelerating. I like the inside which is spatious and cozy. The turning radius is small, too!

作者: macaukafai 時間: 2-8-2010 23:00

用後感~以前楂開MOBILIO,家下新版好似MO仔慨放大版,力水唔錯,第一次楂2千CC慨車,比起楂豐田仲好去D咁,睇位冇想像中咁難,第一次楂咁大部車,開初都好驚,但係遊左半個鐘都上手,(澳門)八百半,聯邦,宋玉生,信達城呢幾個大 ...
stanleykun 發表於 1-8-2010 21:17

有無換太軨呀, 我用17吋, 但感覺好細隻!!

作者: kyy94312 時間: 2-8-2010 23:16

我用緊18＂，都唔係太大食，不過起步就唔好太大腳要就住！

作者: tkwan 時間: 2-8-2010 23:55

18" wheel to replace 16' original configuration? i think the car can't move la ... it is slow already and I can't imagine it can still pick up speed wor !

作者: kaillee 時間: 9-8-2010 15:23

Yes, Spada RK is really good except it is a bit slow in accelerating. I like the inside which is spatious and cozy. The turning radius is small, too!
tkwan 發表於 1-8-2010 22:36

其實都唔會丫, 如果用SPADA, +/- 起步應該唔錯...

作者: chowchow115 時間: 6-9-2010 21:27

看來呢到有幾個馬交..ching喎...小弟都係呀...thanks

作者: stanleykun 時間: 8-7-2012 07:47

哇哈哈~~追返舊閒先知我地係10年見面架!!我都唔記得左添!!!

作者: chowchow115 時間: 8-7-2012 09:00

哇哈哈~~追返舊閒先知我地係10年見面架!!我都唔記得左添!!!
stanleykun 發表於 8-7-2012 07:47

wtf...你現在先入會..會唔會早左d呀...

作者: stanleykun 時間: 8-7-2012 17:58

有心唔怕遲~~~如果唔係一早比老婆鬧死...(買毒物)

作者: chowchow115 時間: 8-7-2012 17:59

有心唔怕遲~~~如果唔係一早比老婆鬧死...(買毒物)
stanleykun 發表於 8-7-2012 17:58

作者: stanleykun 時間: 8-7-2012 18:09

兩年原裝車係時候搞搞佢喇~~~

歡迎光臨 HK Macau Stepwgn Club (http://stepwgnhk.com/)