HK Macau Stepwgn Club - Powered by Discuz! Board

標題: 新手問題 06 Stepwgn 2.4Z 換油 [打印本頁]

作者: uncola 時間: 30-10-2015 17:38 標題: 新手問題 06 Stepwgn 2.4Z 換油

小弟剛入一架06 2.4Z Stepwgn 想換油。

1. 想問呢款車叫RG1或RG3？點去分辨？

2. 如果想換波箱油，應該用ATF－Z1或CVT？

3. 想換機油，Mobile 1 - 5w40 ok嗎？或有其他好介紹？

4. 師兄有乜好火咀同風格介紹？

5. 呢隻車有乜地方要注意？

感謝！

作者: aw1116 時間: 31-10-2015 00:38

本帖最後由 aw1116 於 31-10-2015 00:51 編輯

Halo, 咁啱我都係剛入左部06/07既 2.4z

作者: Kingcow 時間: 31-10-2015 14:52

小弟剛入一架06 2.4Z Stepwgn 想換油。

1. 想問呢款車叫RG1或RG3？點去分辨？

2. 如果想換波箱油，應該用ATF－Z1或CVT？

3. 想換機油，Mobile 1 - 5w40 ok嗎？或有其他好介紹？

4. 師兄有乜好火咀同風格介紹？

...
uncola 發表於 30-10-2015 17:38

1. 前期 RG3. RG1 2000cc 4AT 波箱，RG3 2400cc CVT
2. 呢款CVT 用 HMMF

作者: sammykwan 時間: 31-10-2015 22:59

小弟剛入一架06 2.4Z Stepwgn 想換油。

1. 想問呢款車叫RG1或RG3？點去分辨？

2. 如果想換波箱油，應該用ATF－Z1或CVT？

3. 想換機油，Mobile 1 - 5w40 ok嗎？或有其他好介紹？

4. 師兄有乜好火咀同風格介紹？

...
uncola 發表於 30-10-2015 17:38

2. Honda CVTF or HMMF or compatible (I am using Jaytec HMMF as it is full synthetic)
3. Mobil 1 5w40 is the highest viscosity oil suitable for this engine. If you are a fans of Mobil1, you can stick with it, I think it is not bad, but you may consider 5w30 which give less loading on the oil pump to keep the fluent lubrication for the engine.
4. you better join the club, our committees have some group orders on the sparkplugs and performance filters.
5. if you have never drive a CVT before, then it may take you sometime to get used to the slow response on the kickdown action.

作者: uncola 時間: 1-11-2015 21:05

3# Kingcow

Thank you ching for the information!

作者: uncola 時間: 1-11-2015 21:05

4# sammykwan

Thank you ching for the information. I will join the member as soon as I can.

歡迎光臨 HK Macau Stepwgn Club (http://stepwgnhk.com/)